{
  "_comment": [
    "What SHOULD be available: the site's SDR catalogue. Live status is probed at",
    "runtime and layered on top of this; nothing here depends on a device being up.",
    "Specs are from the vendors (see each device's links), checked 2026-09-18.",
    "photo: a photograph of the actual unit, shown beside the drawing. null until one exists. Only images we may redistribute belong here (this page is public) — add them with tools/add-photo.py, which strips EXIF and records the credit."
  ],
  "domain": "welland.mithis.com",
  "interfaces": [
    "eth0",
    "wlan0"
  ],
  "families": [
    "ipv4",
    "ipv6"
  ],
  "refresh_seconds": 30,
  "devices": {
    "rpi-sdr-antsdr": {
      "radio": "MicroPhase ANTSDR E310",
      "image": "img/antsdr.svg",
      "photo": null,
      "tagline": "A bigger Pluto: 2×2 MIMO with gigabit ethernet",
      "role": "WebSDR",
      "primary_use": "A WebSDR set up like the Pluto's, on a radio with twice the channels and a wider tuning range. Also a platform for transmit and MIMO experiments.",
      "specs": {
        "Tuning": "70 MHz – 6 GHz",
        "Channels": "2 × RX + 2 × TX",
        "Bandwidth": "up to 56 MHz",
        "Sample rate": "up to 30.72 MS/s",
        "Resolution": "12-bit",
        "Front end": "AD9361 + Zynq-7020",
        "Interface": "Gigabit Ethernet · USB 2.0"
      },
      "summary": {
        "tuning": "70 MHz – 6 GHz",
        "channels": "2 × RX + 2 × TX",
        "bandwidth": "56 MHz",
        "tx": true,
        "use": "WebSDR"
      },
      "unique": [
        "Runs Pluto-compatible firmware, so the Pi and OpenWebRX+ see it as a PlutoSDR, but it has the second receive and transmit channel the Pluto's AD9363 leaves out.",
        "The only radio here with its own gigabit ethernet port. It is wired to its Pi twice, over USB and over ethernet, so the IQ stream need not share the Pi's USB 2.0 bus.",
        "Takes an external 10 MHz and PPS reference, so it can be locked to a GPS-disciplined clock."
      ],
      "links": [
        {
          "label": "ANTSDR E310 documentation (MicroPhase)",
          "url": "https://antsdr-docs.microphase.cn/en/latest/device_and_usage_manual/ANTSDR_E_Series_Module/ANTSDR_E310_Reference_Manual/AntsdrE310_Reference_Manual.html"
        },
        {
          "label": "antsdr-fw-patch — the Pluto-compatible firmware",
          "url": "https://github.com/MicroPhase/antsdr-fw-patch"
        }
      ]
    },
    "rpi-sdr-kraken": {
      "radio": "KrakenSDR",
      "image": "img/krakensdr.svg",
      "photo": {
        "file": "img/photos/rpi-sdr-kraken.webp",
        "alt": "The KrakenSDR: a black finned aluminium enclosure with five SMA ports",
        "caption": "Manufacturer photo",
        "credit": "KrakenRF via Crowd Supply",
        "licence": "© KrakenRF Inc. — used with attribution",
        "source": "https://www.crowdsupply.com/krakenrf/krakensdr"
      },
      "tagline": "Five phase-coherent receivers on one clock",
      "role": "WebSDR",
      "primary_use": "Five-channel WebSDR covering VHF/UHF, and the site's direction-finding rig. A mode switcher on the device swaps the whole radio between OpenWebRX+ and the KrakenSDR DoA application, because both want all five receivers.",
      "specs": {
        "Tuning": "24 – 1766 MHz",
        "Channels": "5 × RX (phase-coherent)",
        "Bandwidth": "2.56 MHz per channel",
        "Resolution": "8-bit",
        "Front end": "5 × R820T2 + RTL2832U",
        "Interface": "USB 2.0"
      },
      "summary": {
        "tuning": "24 – 1766 MHz",
        "channels": "5 × RX",
        "bandwidth": "2.56 MHz",
        "tx": false,
        "use": "WebSDR / direction finding"
      },
      "unique": [
        "The only coherent radio here: one clock drives all five tuners, with calibration hardware to measure and correct the phase between them. That is what makes direction finding and beamforming possible.",
        "4.5 V bias tee on every port, so each antenna can power its own LNA.",
        "Used non-coherently it is simply five independent receivers — five bands at once, where every other device here covers one."
      ],
      "links": [
        {
          "label": "KrakenRF",
          "url": "https://www.krakenrf.com/"
        },
        {
          "label": "Crowd Supply campaign (specifications)",
          "url": "https://www.crowdsupply.com/krakenrf/krakensdr"
        },
        {
          "label": "krakensdr_doa — the direction-finding software",
          "url": "https://github.com/krakenrf/krakensdr_doa"
        }
      ]
    },
    "rpi-sdr-pluto": {
      "radio": "ADALM-PLUTO",
      "image": "img/pluto.svg",
      "photo": {
        "file": "img/photos/rpi-sdr-pluto.webp",
        "alt": "An ADALM-PLUTO, showing its Tx and Rx SMA ports",
        "caption": "Manufacturer photo",
        "credit": "Analog Devices wiki",
        "licence": "© Analog Devices — used with attribution",
        "source": "https://wiki.analog.com/university/tools/pluto"
      },
      "tagline": "Analog Devices' learning radio, transmit capable",
      "role": "WebSDR",
      "primary_use": "Wideband WebSDR above 325 MHz — the site's general-purpose UHF and low-microwave receiver.",
      "specs": {
        "Tuning": "325 MHz – 3.8 GHz",
        "Channels": "1 × RX + 1 × TX",
        "Bandwidth": "up to 20 MHz",
        "Resolution": "12-bit",
        "Front end": "AD9363",
        "Interface": "USB 2.0"
      },
      "summary": {
        "tuning": "325 MHz – 3.8 GHz",
        "channels": "1 × RX + 1 × TX",
        "bandwidth": "20 MHz",
        "tx": true,
        "use": "WebSDR"
      },
      "unique": [
        "12-bit sampling, against the 8 bits of the RTL-based receivers: far more dynamic range when a strong signal sits next to a weak one.",
        "Transmit capable, and a well-known firmware tweak re-labels the AD9363 as the identical-die AD9364 for 70 MHz – 6 GHz. Our profiles start at 327 MHz, so this one is running stock.",
        "Self-contained: the radio runs Linux itself and appears over USB ethernet, which is why it also has an `eth-pluto` address on the status page."
      ],
      "links": [
        {
          "label": "ADALM-PLUTO wiki (Analog Devices)",
          "url": "https://wiki.analog.com/university/tools/pluto"
        }
      ]
    },
    "rpi-sdr-rtlsdr-v3": {
      "radio": "RTL-SDR Blog V3",
      "image": "img/rtlsdr.svg",
      "photo": {
        "file": "img/photos/rpi-sdr-rtlsdr-v3.webp",
        "alt": "The RTL-SDR Blog V3 dongle: a black metal stick with a USB plug and an SMA port",
        "caption": "Manufacturer photo",
        "credit": "RTL-SDR Blog",
        "licence": "© RTL-SDR Blog — used with attribution",
        "source": "https://www.rtl-sdr.com/buy-rtl-sdr-dvb-t-dongles/"
      },
      "tagline": "One dongle, one job, always on",
      "role": "ADS-B feeder",
      "primary_use": "A dedicated 1090 MHz ADS-B receiver, running the adsb.im image: readsb decoding, tar1090 map, graphs1090 statistics, and MLAT. It is not a WebSDR — it stays on one frequency so aircraft tracking never stops.",
      "specs": {
        "Tuning": "24 – 1766 MHz",
        "Channels": "1 × RX",
        "Bandwidth": "2.4 MHz usable",
        "Resolution": "8-bit",
        "Front end": "R820T2 + RTL2832U",
        "Interface": "USB 2.0"
      },
      "summary": {
        "tuning": "24 – 1766 MHz",
        "channels": "1 × RX",
        "bandwidth": "2.4 MHz",
        "tx": false,
        "use": "ADS-B feeder"
      },
      "unique": [
        "The only single-purpose device: fixed at 1090 MHz with automatic gain, so its coverage statistics stay comparable over months.",
        "The V3 hardware adds a 1 PPM TCXO, a bias tee and an HF direct-sampling path the other RTL receivers lack.",
        "Carries its own u-blox GPS, giving the feeder a surveyed position and accurate timing for MLAT."
      ],
      "links": [
        {
          "label": "adsb.im — the feeder image",
          "url": "https://adsb.im/home"
        },
        {
          "label": "tar1090 — the map",
          "url": "https://github.com/wiedehopf/tar1090"
        },
        {
          "label": "About RTL-SDR (rtl-sdr.com)",
          "url": "https://www.rtl-sdr.com/about-rtl-sdr/"
        }
      ]
    },
    "rpi-sdr-xsdr": {
      "radio": "Wavelet Lab xSDR",
      "image": "img/xsdr.svg",
      "photo": {
        "file": "img/photos/rpi-sdr-xsdr.webp",
        "alt": "The Wavelet Lab xSDR: a small M.2 card carrying the LMS7002M and an Artix-7 FPGA",
        "caption": "Manufacturer photo",
        "credit": "Wavelet Lab",
        "licence": "© Wavelet Lab — used with attribution",
        "source": "https://wavelet-lab.com/xsdr.html"
      },
      "tagline": "2×2 MIMO on an M.2 card, straight onto PCIe",
      "role": "WebSDR",
      "primary_use": "The newest and widest WebSDR, covering HF edge to 3.8 GHz, and the platform for transmit and MIMO experiments.",
      "specs": {
        "Tuning": "30 MHz – 3.8 GHz",
        "Channels": "2 × RX + 2 × TX",
        "Bandwidth": "up to 90 MHz",
        "Sample rate": "up to 100 MS/s",
        "Front end": "LMS7002M + Artix-7 XC7A50T",
        "Interface": "M.2 2230 A+E · PCIe 2.0 ×2"
      },
      "summary": {
        "tuning": "30 MHz – 3.8 GHz",
        "channels": "2 × RX + 2 × TX",
        "bandwidth": "90 MHz",
        "tx": true,
        "use": "WebSDR"
      },
      "unique": [
        "By far the widest instantaneous bandwidth here — 90 MHz against the KrakenSDR's 2.56 MHz — and the only radio on PCIe rather than USB.",
        "True 2×2 MIMO with external clock synchronisation, so several modules can be locked together.",
        "Runs our own driver build (usdr-lib `welland-packaging`): upstream advertised a 0.1 MHz floor for both tuning and sample rate, but the LO will not lock below 30 MHz and the MMCM will not lock below 0.2 MS/s, so the fork advertises what the hardware actually does.",
        "The card is 32-bit DMA only, which is why its Pi 5 boots with `dtoverlay=pcie-32bit-dma-pi5`."
      ],
      "links": [
        {
          "label": "xSDR product page (Wavelet Lab)",
          "url": "https://wavelet-lab.com/xsdr.html"
        },
        {
          "label": "xSDR hardware documentation",
          "url": "https://docs.wsdr.io/hardware/xsdr.html"
        },
        {
          "label": "usdr-lib — the driver",
          "url": "https://github.com/wavelet-lab/usdr-lib"
        },
        {
          "label": "Our packaging fork + apt repo",
          "url": "https://mith.ro/usdr-lib/"
        }
      ]
    }
  }
}
